您好,歡迎您來訪濟南天銳升降機械有限公司! 公司主營:液壓升降機、液壓登車橋、液壓升降平臺、液壓升降貨梯等。

                            濟南天銳升降機械有限公司

                            液壓升降平臺
                            豐富的升降機設備生產經驗
                            為您提供用心的升降機全套解決方案
                            分類導航CLASSIFIED NAVIGATION
                            聯系天銳機械 / Contact us
                            聯系天銳機械

                            濟南天銳升降機械有限公司

                            客戶統一咨詢熱線

                            188-5411-2626

                            聯系電話:0531-84250097

                            公司地址:山東省濟南市濟陽區濟陽街道工業園15-4號

                            當前位置:  >  新聞中心

                            濟南液壓升降機工作載荷的訣竅

                            文章來源:www.www.lg048.com   發布時間:2015-4-11 14:28:40   瀏覽次數:

                            返回:新聞動態

                            濟南液壓升降機http://www.www.lg048.com/工作載荷的大小和性質對機械的損耗過程有著重要的影響,一般來說,零件的磨損隨負荷的增加而成比例地增加。當零件承受的載荷高于平均設計載荷時,其磨損將會加劇。另外,在其他條件相同時,穩定的載荷比動載荷下磨損要小,故障少,壽命低。
                            The size and nature of the work load of hydraulic lifts Jinan mechanical loss process has a significant impact, in general, increases in proportion with the load of the parts wear increases. When the load is higher than the average bear part of the design load, the wear will increase. In addition, under other conditions, stable load is smaller than the dynamic load wear, less failure, low life.
                                   
                            濟南液壓升降機發動機在不穩定載荷下工作與穩定載荷下工作比較,其氣缸的磨損將增大2倍。在正常負荷下工作的發動機,其故障發生率較低,且壽命延長。相反,超負荷運轉的發動機,故障發生率明顯增多,壽命也會比設計指標減少。經常處于大范圍負荷變動的濟南液壓升降機磨損量大于連續穩定工作的機械。
                            Jinan hydraulic lift engines operate at relatively unstable and stable load work load, the cylinder will increase two-fold wear. Under normal work load of the engine, the failure rate is low, and life expectancy. Instead, overload the engine, the failure rate increased significantly, life will be less than in the design specifications. Often in large-scale changes in hydraulic lifts Jinan load greater than the mechanical wear continuous and stable work.
                                   
                            保證正常的工作載荷主要取決于操作手對濟南液壓升降機http://www.www.lg048.com/的使用,要注意不能在超過機械所能承受的最大負荷下進行工作,要在力所能及的情況下使用機械。作為濟南液壓升降機管理人員,在指定操作人員時,要把隨機資料及操作手冊等交給操作手,使其能正常在掌握機械性能及操作規程,而不應隨意把有關資料扣下來。要盡量保證濟南液壓升降機負荷的均勻加減,使機械處于較為平緩的負荷變動,具體地說,就是要較為均勻地加減油門,防止發動機、工作裝置動作的大起大落。
                            To ensure the normal work load depends on the use of Jinan hydraulic lift operator, and be careful not to exceed the mechanical work under can withstand the maximum load, to use machinery in whatever circumstances. Jinan hydraulic lifts as manager, when the designated operator, put random data and operating manuals to the operator, so that it can properly control the mechanical properties and rules, and should not be free to buckle down information. To try to ensure uniform load subtraction Jinan hydraulic lifts, the mechanical load in a more gentle movements, specifically, is to more evenly subtraction throttle to prevent engine, equipment movement fluctuations.

                            推薦資訊 / Recommended news
                            • 天銳液壓升降舞臺的分類天銳液壓升降舞臺的分類

                              舞臺通過安裝上這些設備徐徐升起,演員在舞臺上翩翩起舞,在舞臺上制造出高低起伏的畫面,同時舞臺升降動作的過程也能增加表演效果.演員可以在上面施展自己的才藝,同時給是觀眾帶來了很好的視覺美觀。不同的升降舞臺有不同的結構形式,不同的結構形式...

                              TIME:2014-10-3
                            熟女吧