您好,歡迎您來訪濟南天銳升降機械有限公司! 公司主營:液壓升降機、液壓登車橋、液壓升降平臺、液壓升降貨梯等。

                            濟南天銳升降機械有限公司

                            液壓升降平臺
                            豐富的升降機設備生產經驗
                            為您提供用心的升降機全套解決方案
                            分類導航CLASSIFIED NAVIGATION
                            聯系天銳機械 / Contact us
                            聯系天銳機械

                            濟南天銳升降機械有限公司

                            客戶統一咨詢熱線

                            188-5411-2626

                            聯系電話:0531-84250097

                            公司地址:山東省濟南市濟陽區濟陽街道工業園15-4號

                            當前位置:  >  新聞中心

                            液壓升降機的電機如何調速?

                            文章來源:www.www.lg048.com   發布時間:2015-4-14 16:15:53   瀏覽次數:

                            返回:新聞動態

                            液壓升降機http://www.www.lg048.com/的壓力機采用進口傳感器和控制器,與聯接器聯鎖,通過觸摸屏對生模具參數進行預置,并根據預置值自動設定裝模高度上模自動夾緊功能內外滑塊均裝有附加墊板快速夾緊裝置,實現對上模的快速夾緊電動移動工作臺配備兩臺電動移動工作臺載運模具,在型導軌上運動。
                            Hydraulic lifts presses imported sensors and controllers, and interlock connector, through the touch screen of the raw mold preset parameters, and automatically set the height of the mold Die automatic clamping function both inside and outside sliders are installed according to the preset value additional pad quick clamping device, to achieve fast moving table on electric clamping mold equipped with two electric movable table carrying mold, on-rail movement.

                            液壓升降機http://www.www.lg048.com/的電機由變頻調速系統控制,以滿足工作臺起步、行走及定位時對速度的不同要求氣墊滯后閉鎖及行程調整機構采用超聲波位移傳感器檢測氣墊行程,可根據代中預置的模具參數對氣墊滯后時間和氣墊行程自動調定。氣壓自動調整功能氣墊和平衡器空氣管路中設有氣壓自動調節裝置,壓力機能根據預置的模具參數和沖壓工藝參數自動調節平衡器的平衡能力和氣墊力,并且能在壓力機工作中自動穩壓,減小氣壓波動,以利于提高制品質量。
                            Hydraulic lift motor control by frequency control system to meet the table start, walking speed and positioning of the different requirements of the air cushion and stroke adjustment lag locking mechanism uses ultrasonic sensors to detect displacement stroke cushion can mold according to preset parameters generation lag time for cushion and cushion stroke automated setup. The automatic pressure adjustment cushion and air line balancer features automatic pressure regulating device, the pressure can automatically adjust the balance and Air Force balancer based mold stamping process parameters and preset parameters, and can automatically work in the press regulator, reducing pressure fluctuations,in order to facilitate and improve product quality.

                            熟女吧