您好,歡迎您來訪濟南天銳升降機械有限公司! 公司主營:液壓升降機、液壓登車橋、液壓升降平臺、液壓升降貨梯等。

                            濟南天銳升降機械有限公司

                            液壓升降平臺
                            豐富的升降機設備生產經驗
                            為您提供用心的升降機全套解決方案
                            分類導航CLASSIFIED NAVIGATION
                            聯系天銳機械 / Contact us
                            聯系天銳機械

                            濟南天銳升降機械有限公司

                            客戶統一咨詢熱線

                            188-5411-2626

                            聯系電話:0531-84250097

                            公司地址:山東省濟南市濟陽區濟陽街道工業園15-4號

                            當前位置:  >  新聞中心

                            液壓升降機如何做好防水工作?

                            文章來源:www.www.lg048.com   發布時間:2016-11-9 21:02:24   瀏覽次數:

                            返回:新聞動態

                            液壓升降機磨合期也叫走合,是指液壓升降機的最初試用階段,是保證機件充分接觸、摩擦、適應、定型的基本階段,這一階段對于升降機的整個使用周期各部件 適應環境的能力、壽命、安全性、經濟性將會產生重要的影響。The hydraulic lift period also away, refers to the initial trial stage of hydraulic elevator, is to ensure the basic mechanical stage and full contact, friction, adaptation, stereotypes, this stage to have an important impact on the environmental capacity, service life, safety and economy for each component will lift the entire life cycle. 

                            1.由于液壓升降機零部件的松動、振動和機器受熱的影響,機器的密封面以及管接頭等處,液壓泵站、油缸和油管接頭處會出現滲漏現象。Due to the loosening of the hydraulic elevator parts, vibration and the impact of the machine, the sealing surface of the machine and pipe joints, hydraulic pump station, cylinder and pipe joints will appear leakage phenomenon.

                            2.液壓升降機出廠前雖然按規定進行了磨合處理,但零件表面仍然較粗糙,加之新零配件間有較多的金屬粒脫落,使磨損加劇。Hydraulic lift before leaving the factory according to the provisions of the running in processing, but the parts surface is still rough, coupled with a new spare parts have more metal particles off, so wear and tear.

                            3.脫落的金屬屑進入液壓系統造成油路堵塞,可能出現機件卡死、發熱和滲漏等故障。Metal scraps off into the hydraulic system caused by oil plug, possible parts stuck, fever and leakage fault.

                            4.液壓升降機的轉動部位緊固件容易松動,由于在運輸和使用過程中的震動、沖擊、超載等交變負荷,容易使原來緊固的零部件產生松動。The rotating part of the hydraulic lift is easy to loosen, because of the vibration, shock, overload and other alternating load in the process of transportation and use, it is easy to loosen the original parts.

                            5.液壓升降貨梯操作員對于設備不了解,對于操作規程不熟悉造成操作失誤,容易引發故障,甚至造成事故,所以升降機操作員要認真學習,熟知后方可上崗。Hydraulic lifting elevator operators do not understand the equipment, the operation rules are not familiar with the errors caused by the operation, easily lead to failure, and even cause accidents, so the lift operator should study, known before the appointment.

                             

                            推薦資訊 / Recommended news
                            • 液壓升降機軸銷部位磨損介紹液壓升降機軸銷部位磨損介紹

                              液壓升降機http://www.www.lg048.com/分為固定剪叉式和移動剪叉式,它們的結構都是通過剪叉臂的折疊和伸展進行上升和下降的,所以液壓升降機剪叉臂的軸銷也是設備磨損的重要部位。如果我們使用頻繁的話,為保證液壓升降機使用安全,...

                              TIME:2015-4-13
                            熟女吧